회사 세부 사항

  • Changzhou Ruide Drying Engineering Technology Co., Ltd

  •  [Jiangsu,China]
  • 회사유형:제조사
  • Main Mark: 미주 , 아시아 , 유럽 , 북유럽 , 기타 시장 , 서유럽
  • 수출업자:71% - 80%
  • 인증서 표시:ISO9001
  • 기술:희석 단계 공압 컨베이어 시스템 공장 운영자,희석 단계 공압식 이송 시스템,희석 단계 공압 전달 시스템 Manfacturers
메세지 바구니 (0)

Changzhou Ruide Drying Engineering Technology Co., Ltd

희석 단계 공압 컨베이어 시스템 공장 운영자,희석 단계 공압식 이송 시스템,희석 단계 공압 전달 시스템 Manfacturers

홈페이지 > 제품 리스트 > 공압 컨베이어 시스템 > 희석 단계 공압식 이송 시스템 > 희석 단계 공압 운반 시스템 공장 운영자
제품 디렉토리
온라인 서비스

희석 단계 공압 운반 시스템 공장 운영자

공유:  
    단가: USD 26500 - 7500 / Set/Sets
    Incoterm: FOB
    최소 주문량: 1 Set/Sets
    배송 시간: 30 일

기본 정보

모형: Dilute phase pneumatic conveying system

Additional Info

포장: 나무로되는 상자

생산력: 15sets

상표: Ruide

수송: Ocean

원산지: 중국

공급 능력: 2Sets/Month

인증 : ISO9001

제품 설명

Product range: Dense Phase Systems

Product category: Pneumatic Conveying Series

Product introduction:

It can be with two ways: tank transmission and rotary valve transmission. The former is through compressing the tank to a stated pressure,switching the discharging valve and air knife to distribute materials( they are in the state of a plunger to realize the whole process of transmission. Speed of airflow transmission is much lower, yet fixing this kind of airflow is much higher. Besides, transmitting barometric pressure is also higher. Air or nitrogen is usually used for transmitting with compressor providing power. Its main characteristics are low transmission speed and little influence against quality of material. Rotary valve pneumatic hyperflow is in the way of Dilute Phase positive pressure to transmitting with compressor providing power. This system has much higher pressure, much lower speed of flow, but much heavier transmitting capacity with little influence again materials.

 conveying system

Pneumatic Hyperflow system usually has the following combination:

 

1. Solid-state Dense Phase

It is usually used for single-point feeding materials, long-distance transmission with the materials being fragile and abrasive. It is almost full of materials in type of plunger flow moving forward in the tubing, which is in a low speed and high density way to transmitting materials in the tubing.

 

2. Discontinuous Dense Phase

It is usually used for single-point feeding materials and much longer-distance transmission. It is almost full of materials in type of plunger flow moving forward in the tubing. Those materials have little abrasiveness to the tubing and are invulnerable to breakage. And they are usually transmitted by positive pressure.

 

Positive transmitting system is an energy-saving with high efficiency transmitting way to transmit materials to a long distance by compressed air.

 

Its air supply is compressor air motor.

 conveying system

According to different transmitting materials and layout forms, it is necessary to calculate pneumatic transmission seriously and rigidly.

 

There are several different transmission ways for positive pressure system as follows:

 

1). In the way of Feeding through Star-rotary valve, transmit materials in the tubing into store holder

2) In the way of Feeding through rotary valve, transmit materials in the tubing into store holder.

 

3). combined negative pressure/ positive pressure transmitting system is through negative pressure driving the near multipoint materials into the aggregate bin, and the bin pump set below the aggregate bin transmitting materials into store holder or other receiving points.

 

3. Continuous dense phase

It is the way of Multipoint feeding and single-point discharging. Materials Transmission speed in the tubing is lower than that of suspended state which is suitable for transmitting powder and little granule.




제품 디렉토리 : 공압 컨베이어 시스템 > 희석 단계 공압식 이송 시스템

제품이미지
  • 희석 단계 공압 운반 시스템 공장 운영자
  • 희석 단계 공압 운반 시스템 공장 운영자
이 업체에게 이메일로 보내기
  • *제목:
  • *메시지:
    귀하의 메시지 20-8000 자 사이 여야합니다
공급 업체와 통신?공급 업체
Denis Mr. Denis
나는 당신을 위해 무엇을 할 수 있습니까?
지금 채팅 공급 업체에 문의하십시오